Renewable Energy Resources and Technologies
Reza Roohi; Masoud Akbari
Abstract
The design of novel and effective receivers is one of the most challenging aspects of solar energy harvesters, especially for Parabolic Dish Collectors (PDCs). The variation of solar flux due to the solar time and sky clearance index can affect the output thermal energy of the collector. One of the major ...
Read More
The design of novel and effective receivers is one of the most challenging aspects of solar energy harvesters, especially for Parabolic Dish Collectors (PDCs). The variation of solar flux due to the solar time and sky clearance index can affect the output thermal energy of the collector. One of the major approaches to producing a uniform performance for the PDCs is the utilization of Phase Change Materials (PCMs). The PCMs can absorb the solar flux at its peak instances. Subsequently, due to the thermal buffering effect, excess energy is released in cases with lower solar flux. In the present study, a novel design of receiver with multiple layers of thin PCM inserted between the passages of the working fluid is numerically simulated. The simulations are designed to determine the effect of operational parameters on the performance of the examined novel receiver. According to the results, by increasing the Heat Transfer Fluid (HTF) flow rate from 60 to 90 kg/h, the system efficiency is increased from 53.8 to 66.4 %.
Advanced Energy Technologies
Mohammad Saleh Barghi Jahromi; Vali Kalantar; Mohammad Sefid; Masoud Iranmanesh; Hadi Samimi Akhijahani
Abstract
Paraffin waxes are widely used as commercial organic heat storage phase changes (PCM) for many applications due to their suitable properties. Significant heat from fusion, nonpoisonous and stable properties, no phase separation, and the phase process result in a small volume change. Meanwhile, they are ...
Read More
Paraffin waxes are widely used as commercial organic heat storage phase changes (PCM) for many applications due to their suitable properties. Significant heat from fusion, nonpoisonous and stable properties, no phase separation, and the phase process result in a small volume change. Meanwhile, they are subject to low thermal conductivity. The thermal conductivity of PCMs can be increased by different techniques such as the use of dispersion of particles or nanomaterials with high conductivity in PCM and the use of metal foams. The use of nanoparticles has such disadvantages as high cost and particle deposition after various cycles. Hence, in this study, some experiments were carried out to investigate the effect of porous media like copper foam and iron wool as the filler instead of nanomaterials on improving the heat conductivity of PCM. The results show that the porous foam increases the heat transfer and during the charging operation, the temperature of the porous plate wall increases continuously at the same rate as the paraffin. At 2400 s, the temperature of pure PCM, iron wool, and copper foam reaches 67.3, 72.5, and 73.27℃, respectively. The optimal mode is the one in which the copper absorber plate is connected to the copper foam, thus reducing the charging time by 600 s compared to pure PCM and saving 75% of energy. Connecting the copper absorber plate to the iron wool has a good thermal performance and stores 70.83% of energy. Thus, iron wool has an acceptable performance and is suitable for storage systems.
Advanced Energy Technologies
Mohammed Ali Sami Mahmood; Rodionov Yuriy Viktorovich; Alexandr Viktorovich Shchegolkov
Abstract
Researchers worldwide are studying thermal energy storage with phase change materials because of their substantial benefits in the enhancement of energy efficiency of thermal drying systems. A two-stage convective-vacuum impulsive drying plant is a technology for the manufacturing of chemical and food ...
Read More
Researchers worldwide are studying thermal energy storage with phase change materials because of their substantial benefits in the enhancement of energy efficiency of thermal drying systems. A two-stage convective-vacuum impulsive drying plant is a technology for the manufacturing of chemical and food products with high quality and low energy costs. Energy consumption during the drying process is the main indicator in terms of economy. In this paper, a brief and focused review of the peculiarities of TEAs with PPCMs and opportunities of their application in such drying systems is done and discussed. The paper described the mentioned manufacturing system. The advantages of paraffin wax and thermal conductivity improvement techniques were demonstrated for their use as heat storage materials in CVID drying units. The results of similar previous studies were presented. The results of the experimental studies conducted by the researchers proved that the use of heat accumulators with PCMs increased the overall energy efficiency of drying systems. Finally, integration of TEAs based on modified PPCMs in the CVID system was recommended to intensify thermal energy, reduce thermal influence on the main indicators of the vacuum pump during the evacuation process, and decrease production costs.
Advanced Energy Technologies
Ehsan Hasan Zaim; Hadi Farzan
Abstract
Utilizing thermal storage units such as Phase Change Materials (PCMs) is a suitable approach to improving Solar Air Heaters (SAHs). The present study tries to assess the effects of PCM mass values on the heat dynamics and thermal performance of SAHs. To this aim, an analytical thermodynamic model was ...
Read More
Utilizing thermal storage units such as Phase Change Materials (PCMs) is a suitable approach to improving Solar Air Heaters (SAHs). The present study tries to assess the effects of PCM mass values on the heat dynamics and thermal performance of SAHs. To this aim, an analytical thermodynamic model was developed and validated by available experimental data. This model provides a robust numerical framework to model the phase change phenomenon and analyze the heat dynamics and thermal performance of SAH using various PCM masses. Four scenarios were considered using the developed analytical model including SAHs using 0, 30, 60, 90 kg PCM. The obtained results illustrated that the maximum outlet temperature was reduced, approximately near 20 %, by increasing the PCM mass between 0 and 90 kg; however, heating time was extended to periods when solar energy availability was inadequate. The thermal performance improved by nearly 14.5 % in the SAH using 90 kg PCM mass compared to the SAH without using PCM. The thermal performance of the SAH with 90 kg PCM was slightly higher than the SAH using 30 kg of PCM; hence, a significant portion of stored thermal energy was lost during nighttime through heat exchange with ambient surroundings. The obtained results also showed that despite available latent thermal energy, the outlet air temperature profiles for the SAHs using different PCM mass were close after sunset due to the low thermal conductivity of paraffin.