Abou-Kandil, A. I., Awad, A., & Mwafy, E. (2015). Polymer nanocomposites part 2: Optimization of zinc oxide/high-density polyethylene nanocomposite for ultraviolet radiation shielding.
Journal of Thermoplastic Composite Materials,
28(11), 1583–1598.
https://doi.org/10.1177/0892705714551242
Aghabarari, B. (2016). Biodiesel Production Using Hybrid Amino Functionalized Chitosan-Carbon Support as Green Catalyst.
Journal of Renewable Energy and Environment J,
3(2), 57–62.
https://doi.org/10.30501/jree.2016.70085
Andrady, A. L. (1990). Weathering of polyethylene (LDPE) and enhanced photodegradable polyethylene in the marine environment.
Journal of Applied Polymer Science,
39(2), 363–370.
https://doi.org/10.1002/app.1990.070390213
Andrady, A. L., Pegram, J. E., & Tropsha, Y. (1993). Changes in carbonyl index and average molecular weight on embrittlement of enhanced-photodegradable polyethylenes.
Journal of Environmental Polymer Degradation,
1(3), 171–179.
https://doi.org/10.1007/BF01458025
Bajwa, D. S., Shojaeiarani, J., Liaw, J. D., & Bajwa, S. G. (2021). Role of hybrid nano-zinc oxide and cellulose nanocrystals on the mechanical, thermal, and flammability properties of poly (Lactic acid) polymer.
Journal of Composites Science,
5(2).
https://doi.org/10.3390/jcs5020043
Bax, V., van de Lageweg, W. I., van den Berg, B., Hoosemans, R., & Terpstra, T. (2022). Will it float? Exploring the social feasibility of floating solar energy infrastructure in the Netherlands.
Energy Research and Social Science,
89(February), 102569.
https://doi.org/10.1016/j.erss.2022.102569
Brandon, J., Goldstein, M., & Ohman, M. D. (2016). Long-term aging and degradation of microplastic particles: Comparing in situ oceanic and experimental weathering patterns.
Marine Pollution Bulletin,
110(1), 299–308.
https://doi.org/10.1016/j.marpolbul.2016.06.048
Carmona, F., & Ravier, J. (2002). Electrical properties and mesostructure of carbon black-filled polymers. Carbon, 40(2), 151–156. https://doi.org/10.1016/S0008-6223(01)00166-X
de Blécourt, M., Brumme, R., Xu, J., Corre, M. D., & Veldkamp, E. (2013). Soil Carbon Stocks Decrease following Conversion of Secondary Forests to Rubber (Hevea brasiliensis) Plantations.
PLoS ONE,
8(7).
https://doi.org/10.1371/journal.pone.0069357
Estrada-Núñez, S. A., González-Núñez, R., & Rodrigue, D. (2006). The effect of composition on impact properties of foamed HDPE/PP blends.
Cellular Polymers,
25(6), 277–292.
https://doi.org/10.1177/026248930602500601
Fereshtehpour, M., Javidi Sabbaghian, R., Farrokhi, A., Jovein, E. B., & Ebrahimi Sarindizaj, E. (2021). Evaluation of factors governing the use of floating solar system: A study on Iran’s important water infrastructures.
Renewable Energy,
171, 1171–1187.
https://doi.org/10.1016/j.renene.2020.12.005
Flandin, L., Hiltner, A., & Baer, E. (2001). Interrelationships between electrical and mechanical properties of a carbon black-filled ethylene-octene elastomer.
Polymer,
42(2), 827–838.
https://doi.org/10.1016/S0032-3861(00)00324-4
Gao, W., Li, Y., Zhao, J., Zhang, Z., & Tang, W. (2022). Influence of surface modification of zinc oxide on physical properties of high density polyethylene.
Colloids and Surfaces A: Physicochemical and Engineering Aspects,
653, 130000.
https://doi.org/https://doi.org/10.1016/j.colsurfa.2022.130000
Grigoriadou, I., Pavlidou, E., Paraskevopoulos, K. M., Terzopoulou, Z., & Bikiaris, D. N. (2018). Comparative study of the photochemical stability of HDPE/Ag composites.
Polymer Degradation and Stability,
153, 23–36.
https://doi.org/10.1016/j.polymdegradstab.2018.04.016
Hokkanen, S., Bhatnagar, A., & Sillanpää, M. (2016). A review on modification methods to cellulose-based adsorbents to improve adsorption capacity.
Water Research,
91, 156–173.
https://doi.org/10.1016/j.watres.2016.01.008
Kamalian, P., Khorasani, S. N., Abdolmaleki, A., Karevan, M., Khalili, S., Shirani, M., & Neisiany, R. E. (2020). Toward the development of polyethylene photocatalytic degradation. Journal of Polymer Engineering, 40(2), 181–191.
https://doi.org/10.1515/polyeng-2019-0230
Kumar, M., Mohammed Niyaz, H., & Gupta, R. (2021). Challenges and opportunities towards the development of floating photovoltaic systems.
Solar Energy Materials and Solar Cells,
233(January), 111408.
https://doi.org/10.1016/j.solmat.2021.111408
Liang, J. Z., & Yang, Q. Q. (2009). Mechanical properties of carbon black-filled high-density polyethylene antistatic composites.
Journal of Reinforced Plastics and Composites,
28(3), 295–304.
https://doi.org/10.1177/0731684407081376
Mendes, L. C., Rufino, E. S., De Paula, F. O. C., & Torres, A. C. (2003). Mechanical, thermal and microstructure evaluation of HDPE after weathering in Rio de Janeiro City.
Polymer Degradation and Stability,
79(3), 371–383.
https://doi.org/10.1016/S0141-3910(02)00337-3
Nayak, N. C., Achary, P. G. R., Das, S., & Begum, S. (2014). Effect of carbon black on microcellular behavior of ethylene-octene copolymer vulcanizates.
Cellular Polymers,
33(2), 71–86.
https://doi.org/10.1177/026248931403300201
Noer, Z., Mn, N., Bukit, N., Juwairiah, Susilawati, & Ikhwanuddin. (2018). Characterization of low-density polyethylene (LDPE)/carbon black (CB) nanocomposite-based packaging material.
Journal of Physics: Conference Series,
1120(1).
https://doi.org/10.1088/1742-6596/1120/1/012066
Ovalı, S., & Sancak, E. (2022). Investigating the effect of the aging process on LDPE composites with UV protective additives.
Journal of Thermoplastic Composite Materials,
35(11), 1921–1939.
https://doi.org/10.1177/0892705720941908
Painuly, J. P. (2001). Painuly 2000.pdf. 24, 73–89.
Park, S. J., Seo, M. K., & Nah, C. (2005). Influence of surface characteristics of carbon blacks on cure and mechanical behaviors of rubber matrix compoundings.
Journal of Colloid and Interface Science,
291(1), 229–235.
https://doi.org/10.1016/j.jcis.2005.04.103
Parvin, N., Ullah, M. S., Mina, M. F., & Gafur, M. A. (2013). Structures and mechanical properties of talc and carbon black reinforced high density polyethylene composites : Effects of organic and inorganic fillers.
Journal of Bangladesh Academy of Sciences,
37(1), 11–20.
https://doi.org/10.3329/jbas.v37i1.15675
Pavličević, J., Špírková, M., Bera, O., Jovičić, M., Pilić, B., Baloš, S., & Budinski-Simendić, J. (2014). The influence of ZnO nanoparticles on thermal and mechanical behavior of polycarbonate-based polyurethane composites.
Composites Part B: Engineering,
60, 673–679.
https://doi.org/10.1016/j.compositesb.2014.01.016
Rasouli, D., Dintcheva, N. T., Faezipour, M., La Mantia, F. P., Mastri Farahani, M. R., & Tajvidi, M. (2016). Effect of nano zinc oxide as UV stabilizer on the weathering performance of wood-polyethylene composite.
Polymer Degradation and Stability,
133, 85–91.
https://doi.org/10.1016/j.polymdegradstab.2016.08.004
Razeghi Jahromi, D., Minoofar, A., Ghorbani, G., Gholami, A., Ameri, M., & Zandi, M. (2023). Harnessing Sunlight on Water: A Comprehensive Analysis of Floating Photovoltaic Systems and their Implications Compared to Terrestrial.
Journal of Renewable Energy and Environment.
https://doi.org/10.30501/jree.2023.400301.1601
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., Elschner, A., Haillant, O., Currier, T. R., Shrotriya, V., Hermenau, M., Riede, M., Kirov, K. R., Trimmel, G., Rath, T., … Krebs, F. C. (2011). Consensus stability testing protocols for organic photovoltaic materials and devices.
Solar Energy Materials and Solar Cells,
95(5), 1253–1267.
https://doi.org/10.1016/j.solmat.2011.01.036
Rojas, K., Canales, D., Amigo, N., Montoille, L., Cament, A., Rivas, L. M., Gil-Castell, O., Reyes, P., Ulloa, M. T., Ribes-Greus, A., & Zapata, P. A. (2019). Effective antimicrobial materials based on low-density polyethylene (LDPE) with zinc oxide (ZnO) nanoparticles.
Composites Part B: Engineering,
172(January),173–178.
https://doi.org/10.1016/j.compositesb.2019.05.054
Sahu, A. K., & Sudhakar, K. (2019). Effect of UV exposure on bimodal HDPE floats for floating solar application.
Journal of Materials Research and Technology,
8(1), 147–156.
https://doi.org/10.1016/j.jmrt.2017.10.002
Sahu, A. K., Sudhakar, K., & Sarviya, R. M. (2019). Effect of seawater on properties of hdpe material used for floating solar applications.
International Journal of Mechanical and Production Engineering Research and Development,
9(4), 253–262.
https://doi.org/10.24247/ijmperdaug201926
Sahu, A. K., Sudhakar, K., & Sarviya, R. M. (2020). U.V light effect on the mechanical behaviour of HDPE/Carbon black composites.
IOP Conference Series: Materials Science and Engineering,
788(1).
https://doi.org/10.1088/1757-899X/788/1/012054
Shah, V. (2006). Handbook of Plastics Testing and Failure Analysis: Third Edition. In
Handbook of Plastics Testing and Failure Analysis: Third Edition.
https://doi.org/10.1002/0470100427
Simões, D. N., Pittol, M., Tomacheski, D., Ribeiro, V. F., & Santana, R. M. C. (2017). Thermoplastic elastomers containing zinc oxide as antimicrobial additive under thermal accelerated ageing.
Materials Research,
20(Table 1), 325–330.
https://doi.org/10.1590/1980-5373-mr-2016-0790
Sit, M., Dashatan, S., Zhang, Z., Dhakal, H. N., Khalfallah, M., Gamer, N., & Ling, J. (2023). Inorganic Fillers and Their Effects on the Properties of Flax/PLA Composites after UV Degradation.
Polymers,
15(15).
https://doi.org/10.3390/polym15153221
Types, A. A. (n.d.). Polypropylene / ZnO Nanocomposites : Mechanical Properties , Photocatalytic Dye Degradation , and Antibacterial Property (Vol. 4, Issue 4).
Vahidi, G., Bajwa, D. S., Shojaeiarani, J., & Stark, N. M. (2022). Experimental investigation into the direct feeding of coupling agent, cellulose nanocrystals, and nano zinc oxide in high-density polyethylene.
Composites Part C: Open Access,
8(June), 100287.
https://doi.org/10.1016/j.jcomc.2022.100287
Vidakis, N., Petousis, M., Michailidis, N., Mountakis, N., Argyros, A., Spiridaki, M., Moutsopoulou, A., Papadakis, V., & Charitidis, C. (2023). High-Density Polyethylene/Carbon Black Composites in Material Extrusion Additive Manufacturing: Conductivity, Thermal, Rheological, and Mechanical Responses.
Polymers,
15(24).
https://doi.org/10.3390/polym15244717
White, J. R., & Turnbull, A. (1994). Weathering of polymers: mechanisms of degradation and stabilization, testing strategies and modelling.
Journal of Materials Science,
29(3), 584–613.
https://doi.org/10.1007/BF00445969