Renewable Energy Resources and Technologies
Ali Ebadi; Ali Akbar Abdoos; Mohammad Ebrahim Moazzen; Sayyed Asghar Gholamian
Abstract
Nowadays, the Permanent Magnet (PM) generator has become an instrumental tool for wind power generation due to its high performance. In this study, an optimal design is established to provide a cost-effective multiphase outer-rotor PM wind generator (OR-PMWG). The cost of the generation system (generator ...
Read More
Nowadays, the Permanent Magnet (PM) generator has become an instrumental tool for wind power generation due to its high performance. In this study, an optimal design is established to provide a cost-effective multiphase outer-rotor PM wind generator (OR-PMWG). The cost of the generation system (generator and power converter) as well as the annual energy output must be optimized to ensure cost-effective PM wind generation. In fact, the main novelty of this paper lies in the presentation of an accurate model of OR-PMWG and the investigation of the design variables affecting annual energy output and the generation system cost (GSC). In this respect, a multi-objective framework is presented to make satisfactory agreement among all objectives. At first, the main optimal design objectives namely generation system cost and annual energy output are optimized separately and then, a multi-objective optimization is established, in which all the objectives are considered simultaneously. In order to tackle these optimization problems, Genetic Algorithm (GA) is adopted herein to determine the design variables. It is also shown that simultaneous optimization with 71.39 (MWh) AEO and 2651.51 (US$) GSC leads to a more optimal design for a PM wind generation system. In addition, the effectiveness of the presented optimal design is demonstrated by making a comparison between a prototype outer-rotor PM wind generator and the theoretical counterpart. Finally, a finite element analysis (FEA) is carried out for the validation of the outcomes obtained from the proposed optimal design.
Mahboobe Sabaghian; Fateme Ahmadi Boyaghchi
Abstract
Energy, exergy and exergoeconomic (3E) evaluation are performed to assess the performance of a NH3/H2O cycle integrated with parabolic trough solar collectors (PTSC). To provide continuous electricity produced by generator when solar beam radiation is insufficient a stabilizer temperature subsystem is ...
Read More
Energy, exergy and exergoeconomic (3E) evaluation are performed to assess the performance of a NH3/H2O cycle integrated with parabolic trough solar collectors (PTSC). To provide continuous electricity produced by generator when solar beam radiation is insufficient a stabilizer temperature subsystem is utilized. The major thermodynamic parameters and climate conditions variations are selected to investigate, for their effects on the energy efficiency, exergy efficiency and unit cost of electricity of the overall system. The results reveal that the solar collectors exhibit the worst exergy and exergoeconomic performance, so that when system is only fuelled by solar energy, elevation of solar beam irradiation around 40% reduces the efficiencies and electricity production cost within 23% and 0.4%, respectively. It is found that the increment of ammonia basic concentration, turbine inlet pressure, evaporator inlet temperature and evaporator pinch temperature lead to elevation of energy and exergy efficiencies and decrement of electricity production cost. Then, the single and multi-objective optimizations are performed to maximize the energy and exergy efficiencies and minimize the electricity production cost based on genetic algorithm (GA). Results indicate that the electricity production cost obtained through economic optimization is less than around 2% and 2.2% compared to the optimization based on the first and second laws of thermodynamics. Multi objective optimization causes reduction of electricity production cost around 14% and enhancement the energy and exergy efficiencies 8.5% and 6.7%, respectively too.
