Environmental Impacts and Sustainability
Nima Amani
Abstract
Building insulation stands out as one of the most widely employed strategies to enhance energy efficiency in the building sector. Increasing the thickness of thermal insulation is a conventional approach to meet the design requirements of these structures. In this study, a novel approach to augment the ...
Read More
Building insulation stands out as one of the most widely employed strategies to enhance energy efficiency in the building sector. Increasing the thickness of thermal insulation is a conventional approach to meet the design requirements of these structures. In this study, a novel approach to augment the thermal resistance of external building walls is explored by simultaneously employing multiple thermal insulation materials, comparing this with a single-layer insulation setup. Three typical insulation materials with varying thicknesses are utilized to create a three-layer insulation system, which is applied to a case study involving a house-like cubicle situated in the 3B climate zone per ASHRAE 169-2006. The findings indicate that merely increasing the thickness of a single-layer insulation does not invariably yield optimal solutions. The results emphasize that the consideration of multi-layer insulation systems can establish a continuous decision-making space, enabling the identification of at least one insulation scenario aligned with design requirements. To facilitate designers in the initial stages of thermal insulation design, a rapid and simplified design model has been developed based on the results. The methodology proposed in this study is generalizable and can be applied to all climate zones, offering a comprehensive design tool without the need for intricate calculations.
Renewable Energy Economics, Policies and Planning
Nima Amani; Abdul Amir Reza Soroush
Abstract
Traditionally, building energy model is created in isolation from the architectural building information model and energy analyses have relied on a single analysis tool. The building energy model can be generated more quickly by leveraging existing data from the BIM. The impacts of energy consumption ...
Read More
Traditionally, building energy model is created in isolation from the architectural building information model and energy analyses have relied on a single analysis tool. The building energy model can be generated more quickly by leveraging existing data from the BIM. The impacts of energy consumption are significant in the building usage phase, which can last several decades. Due to the large share of the final energy consumption in the building sector, accurate analysis of thermal and cooling loads of a building and the efforts to reduce energy losses represent an effective way to reduce energy consumption. Therefore, it is essential to analyze the building energy performance in the design phase, which is when critical decisions are made. This study aims to investigate the impact of the building components and construction materials on building energy efficiency using Building Information Modeling (BIM) technology in a mild climate zone. After reviewing the proposed designs, the main building form was chosen for energy modeling and analysis. Then, building energy consumption analysis was performed based on the basic parameters of the building energy model. Eventually, the most optimal mode was selected by examining different energy consumption forms. This study showed that the building HVAC system always had the largest share of energy consumption. Finally, the results of parametric studies on alternative schemes of energy use intensity optimization showed that 22.59 % savings could be achieved as compared to the base building model in a 30-year time horizon
