Renewable Energy Resources and Technologies
Yuvaperiyasamy M; Senthilkumar N; Deepanraj B
Abstract
This experimental study investigates the performance of single-slope solar desalination with finned pond with varying glass cover angle, water depth, usage of sensible and latent heat materials for four different saline water types. Conventional solar stills (CSS) produces less distillate and hence some ...
Read More
This experimental study investigates the performance of single-slope solar desalination with finned pond with varying glass cover angle, water depth, usage of sensible and latent heat materials for four different saline water types. Conventional solar stills (CSS) produces less distillate and hence some design changes are made by integrating finned pond in conventional solar still (CSS-FP) apart from filling paraffin wax and bricks inside the solar still that enhances the thermal storage capacity. The solar still is constructed with galvanized steel for the base and side walls, while the basin is covered with tempered glass whereas the thermal conductivity is improved by applying a black paint on the sides. The finned pond enhances the heat absorption and distribution process, consequently increasing the evaporation rate within the still. The experiment was done in Pongalur, Tamil Nadu, India (10.9729° N, 77.3698° E), the maximum distillate production is achieved at a 35° glass cover angle and a 7 cm water depth. Desalination is done for four saline liquids: bore water (BW), seawater (SW), leather industry wastewater (LW), and plastic industry wastewater (PW). BW exhibits the highest yield due to its lower density and salinity. The chemical analysis of desalinated water suggests its suitability for home use; the economic research reveals a payback period of 230 days, confirming the solar still's financial feasibility. Hence, it is concluded that the proposed CSS-FP can increase productivity compared to the CSS under different conditions.
Renewable Energy Resources and Technologies
Sara taheri; Ahmadreza Faghih Khorasani; Mohsen Mozafari Shamsib
Abstract
Desalination stands out as a prominent method for obtaining fresh water from saltwater sources. The focus of this study revolves around a dehumidifier-dehumidifier system within a closed air-open water desalination framework, exploring two distinct modes: one without integration with solar collectors ...
Read More
Desalination stands out as a prominent method for obtaining fresh water from saltwater sources. The focus of this study revolves around a dehumidifier-dehumidifier system within a closed air-open water desalination framework, exploring two distinct modes: one without integration with solar collectors and the other incorporating solar collectors.Optimal conditions emerged with a fresh water circulation rate of 3 L/min and an incoming salt water flow rate of 1 L/min, resulting in a commendable maximum recovery ratio of 5.33%. Subsequently, in these optimal operating conditions, photovoltaic-thermal (PVT) panels were introduced to the desalination system, yielding insightful results. The output gain ratio (GOR), indicating the efficiency of converting heat to water evaporation, was 0.78 without connecting panels and 0.48 when panels were integrated. With panels connected, the desalination system achieved a peak fresh water production of 2.04 L/hr. Notably, the humidifier tower exhibited an impressive efficiency of 97%, while the dehumidifier tower operated at 40%. The solar collectors contributed significantly, meeting approximately 10% of the system's heating requirements and satisfying 7.3% of its electrical needs. The findings underscore the viability of integrating solar technology into desalination systems, showcasing not only increased fresh water output but also a noteworthy reduction in reliance on conventional energy sources. This innovative approach aligns with the global pursuit of sustainable and efficient water management solutions.
Renewable Energy Resources and Technologies
Amir Reza Khedmati; Mohammad Behshad Shafii
Abstract
The humidification-dehumidification system is one of the desalination technologies that can utilize non-fossil thermal sources and requires insignificant input energy. This system is usually suitable for rural areas and places far from the main sources of energy. The purpose of this study is to obtain ...
Read More
The humidification-dehumidification system is one of the desalination technologies that can utilize non-fossil thermal sources and requires insignificant input energy. This system is usually suitable for rural areas and places far from the main sources of energy. The purpose of this study is to obtain the most suitable working conditions and dimensions of this system. In this research, thermodynamic modeling was first performed for a simple type of the system (water-heated); then, the effect of parameters on the system performance was investigated. Modeling was conducted through a numerical simulation; furthermore, the assumption of the saturation of exhaust air from the humidifier was also considered in the mentioned code. Afterward, a comparison was made between two different forms of the system, and the proper form was chosen for the rest of the research. Moreover, through heat transfer equations, the dimensions of the two main parts of the system, i.e., humidifier and dehumidifier, were calculated. Besides, multi-objective optimization was carried out for two objective functions, i.e., gained output ratio (GOR) and the system volume, to reduce the space occupied by the system and reach the desired efficiency simultaneously. The optimization was performed using a simulation program, and results were obtained for different weights in order to optimize each objective function. For instance, 379 liters of freshwater can be produced in a day with a total volume of 48 liters for the humidifier and the dehumidifier in the optimized system.
Environmental Impacts and Sustainability
Laleh R. Kalankesh; Mohammad Ali Zazouli; Ahmad Mansouri
Abstract
Water scarcity is a critical issue in Caspian Sea regions of Iran. Thus, people may use polluted water or saline brackish groundwater, estuarine water or seawater. This paper deals with the application of Low-Pressure reverse osmosis (RO) for removing salt and Total Organic Carbon (TOC) in synthetic ...
Read More
Water scarcity is a critical issue in Caspian Sea regions of Iran. Thus, people may use polluted water or saline brackish groundwater, estuarine water or seawater. This paper deals with the application of Low-Pressure reverse osmosis (RO) for removing salt and Total Organic Carbon (TOC) in synthetic and Caspian Sea waters. The study aims to achieve optimization at different pressures (30, 50, 70, and 90 PSI) with synthetic seawater at initial salt concentrations (5, 25, and 35 g/L TDS) at various retention time intervals (15, 30, 60, 90, and 120 minutes). The results showed that the low-pressure RO system was able to reject 95 %, 57 %, and 46 % of 5, 25, and 35 g/L of TDS from synthetic seawater. In addition, rejection efficiency was achieved at 86 % and 78 % for Caspian seawater and Tajan River, respectively. In addition, optimal conditions (pressure: 70 PSI, time: 120 min) for salt rejection included 16-23 %, 93-94, 52-56 %, 88-90, and 22 % for 35g/L TDS, Tajan River, 5g/L TDS, 25g/L TDS, and Caspian seawater, respectively. Moreover, TOC rejection was achieved at >95 % and >97 % of Tajan River and Caspian seawater, respectively, at an overall 120-minute interval. In the case of growing environmental pollution that is discharged into Caspian sea including industrial and agricultural effluents from rivers, this study proposed the suggested pilot as a simple design that will significantly reduce salt, TOC, and TDS.
Advanced Energy Technologies
Mohammad Sajjad Rostami; Morteza Khashehchi; Payam Zarafshan; Mohammad Hossein Kianmehr; Ehsan Pipelzadeh
Abstract
Capacitive deionization (CDI) is an emerging energy efficient, low-pressure and low-cost intensive desalination process that has recently attracted experts’ attention. The process is to explain that ions (cations and anions) can be separated by a pure electrostatic force imposed by a small bias ...
Read More
Capacitive deionization (CDI) is an emerging energy efficient, low-pressure and low-cost intensive desalination process that has recently attracted experts’ attention. The process is to explain that ions (cations and anions) can be separated by a pure electrostatic force imposed by a small bias potential. Even at a rather low voltage of 1.2 V, desalinated water can be produced. The process can be well operational by a professional cell design. Although various processes have been manufactured before, in this study, membrane was removed and a new unit was designed and manufactured (Using CFD Simulation). In this case, the combination of activated carbon powder (with an effective surface area of 2600 m2 per gram), carbon black, and polyvinyl alcohol with a ratio of 35/35/30 coated on carbon paper as electrode materials was considered for tests. The weight was 1.41 grams for each material, and the thickness was 0.44 mm. CDI system was tested, and the results of charge-discharge cycles, cyclic voltammetry, and impedance spectroscopy were evaluated. It can be implied that there is no need for a strong pump and, also, pressure drop can be reduced due to such a noticeable space between two electrodes. Preliminary experimental results showed high specific capacitance (2.1 Farad) and ultra-high salt adsorption capacity, compared with similar cases.
Mohammad Ameri; Mojtaba Yoosefi
Abstract
This paper presents sizing, energy management strategy, and cost analysis for a configuration consisting of solar photovoltaic (PV) panels, fuel cell (FC) storage system, and reverse osmosis (RO) desalination technology for combined power and fresh water production. In this system, PV is the main power ...
Read More
This paper presents sizing, energy management strategy, and cost analysis for a configuration consisting of solar photovoltaic (PV) panels, fuel cell (FC) storage system, and reverse osmosis (RO) desalination technology for combined power and fresh water production. In this system, PV is the main power supply source; fuel cell is a storage system accompanied by Hydrogen production and storage devices; and for fresh water production, RO technology is considered as desalination unit. Energy production strategy, developed on the basis of solar irradiance, hourly electricity consumption, and daily fresh water demand to minimize the capacity of components. To this goal, a flowchart diagram is designed, and sizing method is modeled using MATLAB software based on this flowchart. Finally, economic analysis for co-production of fresh water and electricity is discussed, and results of sensitivity analysis for variations of net present value (NPV) cost in terms of different fuel cell storage system prices and different interest rates are presented. Results show that described energy management strategy causes the configuration to follow hourly electrical demand and daily fresh water requirement precisely, so that the total surplus energy production during a day is very little and negligible. Moreover, calculations show that the largest part of costs is due to the energy storage system. So, while the solar PV is the main energy source and solar irradiance in Khark Island more than Astara, the overall configuration cost is greater in Khark Island just because of greater energy storage system costs, nevertheless, using such energy storage systems is necessary due to intermittent inherent of solar energy.
