Advanced Energy Technologies
Tuhid Pashaee Golmarz; Sajadollah Rezazadeh; Maryam Yaldagard; Narmin Bagherzadeh
Abstract
In the present work, a Proton-Exchange Membrane Fuel Cell (PEMFC) as a three-dimensional and single phase was studied. Computational fluid dynamics and finite volume technique were employed to discretize and solve a single set of flow fields and electricity governing equations. The obtained numerical ...
Read More
In the present work, a Proton-Exchange Membrane Fuel Cell (PEMFC) as a three-dimensional and single phase was studied. Computational fluid dynamics and finite volume technique were employed to discretize and solve a single set of flow fields and electricity governing equations. The obtained numerical results were validated with valid data in the literature and good agreement was observed between them. The main purpose of this paper is to investigate the effect of deformation of the geometric structure of a conventional cubic fuel cell into a cylindrical one. For this purpose, some important parameters indicating the operation of the fuel cell such as oxygen distribution, water, hydrogen, proton conductivity of the membrane, electric current density, and temperature distribution for two voltage differences between the anode and cathode and the proposed models were studied in detail. Numerical results showed that in the difference of voltages studied, the proposed new model had better performance than the conventional model and had a higher current density, in which at V = 0.4 [V], about a 10.35 % increase in the amount of electric current density was observed and the average increment in generated power was about 8 %, which could be a considerable value in a stack of cells. Finally, the discussion of critical parameters for both models was presented in more detail. The core idea of the results is that the Oxygen and Hydrogen utilization, water creation, and heat generation are greater in the new model.
Advanced Energy Technologies
Tuhid Pashaee Golmarz; Sajad Rezazadeh; Narmin Bagherzadeh
Abstract
In this paper, a three-dimensional, single-phase proton-exchange membrane fuel cell (PEMFC) is studied numerically. Finite volume method was used for solving the governing equations and, consequently, the numerical results were validated by comparing them with experimental data, which showed good agreement. ...
Read More
In this paper, a three-dimensional, single-phase proton-exchange membrane fuel cell (PEMFC) is studied numerically. Finite volume method was used for solving the governing equations and, consequently, the numerical results were validated by comparing them with experimental data, which showed good agreement. The main objective of this work is to investigate the effect of a novel gas channel shape– by applying sinusoidal gas channel- on the cell performance and mass transport phenomena. Some parameters such as oxygen consumption, water production, protonic conductivity, and temperature distribution for two cell voltages were studied, and the results were compared with respect to conventional and new models. The results indicated that the new novel model showed better performance than the conventional model, especially at low cell voltages, causing an increase in oxygen consumption and water production. Therefore, based on a number of investigated relations, a higher rate of current density was obtained, thus enhancing the fuel cell performance. This is because the incoming species path to the gas channels in the new model becomes longer. Therefore, the diffusion of the species toward the electrochemical reaction area increased.