Environmental Impacts and Sustainability
Taraneh Taheri; Mohammad Behshad Shafii; Sourena Sattari; Morteza Khalaji Assadi
Abstract
Combined Heat and Power (CHP) systems have increasingly drawn attention in recent years due to their higher efficiency and lower Greenhouse Gas (GHG) emission. Input-output matrix modeling was considered here as one of the efficient approaches for optimizing these energy networks. In this approach, power ...
Read More
Combined Heat and Power (CHP) systems have increasingly drawn attention in recent years due to their higher efficiency and lower Greenhouse Gas (GHG) emission. Input-output matrix modeling was considered here as one of the efficient approaches for optimizing these energy networks. In this approach, power flow and energy conversion through plant components were modeled by an overall efficiency matrix including dispatch factors and plant component efficiencies. The purpose of this paper is to propose a modification of the objective function presented in some previous studies. This procedure was performed by adding the parameters of plant component lifetime and environmental costs to the objective function. Thus, the optimization problem was formulated by minimizing the total system levelized cost instead of simply hourly energy cost. The study results revealed that producing the electricity by the trigeneration system led to achieving 1256 MWh annual electricity savings that otherwise must be purchased from the grid. The results also showed a significant reduction in annual CO2 emissions (703.31 tons per year). Furthermore, if the price of purchasing CHP electricity was considered three times more than the current ones, payback times would be less than 5 years.
Renewable Energy Resources and Technologies
Amir Reza Khedmati; Mohammad Behshad Shafii
Abstract
The humidification-dehumidification system is one of the desalination technologies that can utilize non-fossil thermal sources and requires insignificant input energy. This system is usually suitable for rural areas and places far from the main sources of energy. The purpose of this study is to obtain ...
Read More
The humidification-dehumidification system is one of the desalination technologies that can utilize non-fossil thermal sources and requires insignificant input energy. This system is usually suitable for rural areas and places far from the main sources of energy. The purpose of this study is to obtain the most suitable working conditions and dimensions of this system. In this research, thermodynamic modeling was first performed for a simple type of the system (water-heated); then, the effect of parameters on the system performance was investigated. Modeling was conducted through a numerical simulation; furthermore, the assumption of the saturation of exhaust air from the humidifier was also considered in the mentioned code. Afterward, a comparison was made between two different forms of the system, and the proper form was chosen for the rest of the research. Moreover, through heat transfer equations, the dimensions of the two main parts of the system, i.e., humidifier and dehumidifier, were calculated. Besides, multi-objective optimization was carried out for two objective functions, i.e., gained output ratio (GOR) and the system volume, to reduce the space occupied by the system and reach the desired efficiency simultaneously. The optimization was performed using a simulation program, and results were obtained for different weights in order to optimize each objective function. For instance, 379 liters of freshwater can be produced in a day with a total volume of 48 liters for the humidifier and the dehumidifier in the optimized system.
