Renewable Energy Resources and Technologies
Mohammed Ali Sami Mahmood; Sergei Kuzmin
Abstract
Solar Organic Rankine Cycle (SORC) is a successful approach to sustainable development and exploiting clean energy sources. The research aims to improve and evaluate the energy efficiency of the SORC for combined heat and power generation for a residential home under the climatic conditions of Baghdad, ...
Read More
Solar Organic Rankine Cycle (SORC) is a successful approach to sustainable development and exploiting clean energy sources. The research aims to improve and evaluate the energy efficiency of the SORC for combined heat and power generation for a residential home under the climatic conditions of Baghdad, Iraq. Thermoeconomic analysis was carried out for the proposed energy supply system. Refrigerant HFC-245fa was used as a working fluid in a solar organic Rankine cycle, and oil poly alkyl benzene (TLV-330) was suggested as a heat transfer fluid in the solar collector field. Parametric studies for some key parameters were conducted to examine the impact of various operating conditions on energy efficiency. The results showed a significant improvement in energy efficiency. The maximum efficiency of SORC CHPG reached 79.14 % when solar heat source temperatures were in the range of 100 to 150 °C and the solar radiation was at a maximum value of 870 W/m2 at noon on the 15th day of July in Baghdad. The maximum energy produced by SORC CHPG was 472.5 kW when the optimal average value of global solar radiation was 7.5 kWh/m2/day in June. The economic investigations revealed that the payback period of the new energy supply system was 10 years with the positive net present cost when the solar power plant was working 18 h/day.
Advanced Energy Technologies
Mohammad Rasooli Mavini; Hassan Ali Ozgoli; Sadegh Safari
Abstract
In this study, various configurations design of a Heat Recovery Steam Generator (HRSG) are examined to enhance energy efficiency of a Combined Cycle Power Plant (CCPP). A novel approach is used to investigate ten applicable configurations of a dual pressure Heat Recovery Steam Generator HRSG thoroughly ...
Read More
In this study, various configurations design of a Heat Recovery Steam Generator (HRSG) are examined to enhance energy efficiency of a Combined Cycle Power Plant (CCPP). A novel approach is used to investigate ten applicable configurations of a dual pressure Heat Recovery Steam Generator HRSG thoroughly to explore the best practice models from the energy-conserving considerations. Further, a fuel consumption assessment has been conducted to identify the best performance of the cycle and investigate the minimum pollutants released of each Heat Recovery Steam Generator (HRSG) configuration. The results have revealed that four scenarios among ten, have expressed a considerably better performance regarding; fuel consumption, steam production, energy efficiency, and finally yet importantly environmental considerations. Further, it has been found that in comparison to the conventional configuration, not only the selected scenarios have proved almost four times improvement in the low-pressure steam generation, but also 30% fuel consumption saving in supplementary firing has been achieved which has both economic and environmental benefits. Moreover the carbon dioxide saving potential for the best scenario is 51.37 kgCO2 MWh-1 consequently the environmental benefit of it is calculated about 133,418 $ MWh-1.
Renewable Energy Economics, Policies and Planning
Mohammad Ameri; Arian Gerami
Abstract
According to the previous pieces of research, the building sector consumes about 40 % of total yield energy and produce one-third of GHG pollution emission. This point shows the significant potential in two aspects of energy optimization and pollution reduction in this field. The purpose of this research ...
Read More
According to the previous pieces of research, the building sector consumes about 40 % of total yield energy and produce one-third of GHG pollution emission. This point shows the significant potential in two aspects of energy optimization and pollution reduction in this field. The purpose of this research as a case study is to construct a residential building and develop the paths for reaching a zero-energy building, considering GHG emissions in the climate of Tehran, Iran. In thirty scenarios of this study, solar panels, solar water heaters, ground source heat pumps, and combined heat and power generators were selected to provide the required power and energy in the building. All three passive, single active, and hybrid active scenarios were defined and analyzed with respect to technical and economic factors. In all of the defined scenarios, the conditions are two-folded: (a) considering the effect of national profits, fuel saving, and pollution reduction and (b) without considering them so that the results would become more realistic. In the end, three different types of conclusions were made with respect to macro-engineering, energy, and economic perspectives. Statistical conclusions based on a questionnaire filled by 50 people and the perspective of achieving NZEB definition are presented.