1. Zhou, J., Xu, H. and Gao, L., "New process of separation and purification byproduct hydrogen in chlor-alkali plants",
Proceedings of 2010 International Conference on Mechanic Automation and Control Engineering, (2010). (
https://doi.org/10.1109/MACE.2010.5535424).
2. Faur Ghenciu, A., "Review of fuel processing catalysts for hydrogen production in PEM fuel cell systems",
Current Opinion in Solid State and Materials Science, Vol. 6, No. 5, (2002), 389-399. (
https://doi.org/10.1016/S1359-0286(02)00108-0).
3. Li, H., Wang, H., Qian, W. and Zhang, Sh., "Chloride contamination effects on proton exchange membrane fuel cell performance and durability",
Journal of Power Sources, Vol. 196, No. 15, (2011), 6249-6255. (
https://doi.org/10.1016/j.jpowsour.2011.04.018).
5. Garcia-Herrero, I., Margallo, M., Onandía, R., Aldaco, R. and Irabien, A
.,"Environmental challenges of the chlor-alkali production: Seeking answers from a life cycle approach",
Science of the Total Environment, Vol. 580, (2017), 147-157. (
https://doi.org/10.1016/j.scitotenv2016.10.202).
6. Garcia-Herrero, I., Margallo, M., Onandía, R., Aldaco, R. and Irabien, A
., "Life Cycle Assessment model for the chlor-alkali process: A comprehensive review of resources and available technologies",
Sustainable Production and Consumption, Vol. 12, (2017), 44-58. (
https://doi.org/10.1016/j.spc.2017.05.001).
7. Chaubey, R., Sahu, S., James, O. and Maity, S., "A review on development of industrial processes and emerging techniques for production of hydrogen from renewable and sustainable sources",
Renewable and Sustainable Energy Reviews, Vol. 23, (2013), 443-462. (
https://doi.org/10.1016/j.rser.2013.02.019).
8. Dutta, S., "A review on production, storage of hydrogen and its utilization as an energy resource",
Journal of Industrial and Engineering Chemistry, Vol. 20, No. 4, (2014), 1148-1156. (
https://doi.org/10.1016/j.jiec.2013.07.037).
9. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B. and Sheffield, J.W., "Hydrogen recovery, cleaning, compression, storage, dispensing, distribution system and End-Uses on the university campus from combined heat, hydrogen and power system",
International Journal of Hydrogen Energy, Vol. 39, No. 2, (2014), 647-653. (
https://doi.org/10.1016/j.ijhydene.2013.10.111).
11. Verhage, A.J.L., Coolegem, J.F., Mulder, M.J.J., Yildirim, M.H. and de Bruijn, F.A., "30,000 h operation of a 70 kW stationary PEM fuel cell system using hydrogen from a chlorine factory",
International Journal of Hydrogen Energy, Vol. 38, No. 11, (2013), 4714-4724. (
https://doi.org/10.1016/j.ijhydene.2013.01.152).
13. Lin, B.Y.S., Kirk, D.W. and Thorpe, S.J., "Performance of alkaline fuel cells: A possible future energy system?",
Journal of Power Sources, Vol. 161, No. 1, (2006), 474-483. (
https://doi.org/10.1016/j.jpowsour.2006.03.052).
15. Guandalini, G., Foresti, S., Campanari, S., Coolegem, J.F. and Have, J.T., "Simulation of a 2 MW PEM fuel cell plant for hydrogen recovery from chlor-alkali industry
", Energy Procedia, Vol. 105, (2017), 1839-1846. (
http://doi.org/10.1016/j.egypro.2017.03.538).
16. Peantong, S. and Tangjitsitcharoen, S., "A study of using hydrogen gas for steam boiler",
Proceedings of IOP Conference Series: Materials Science and Engineering, Vol. 215, (2017), 012018. (
https://doi.org/10.1088/1757-899X/215/1/012018).
17. Khasawneh. H., Saidan,
M. and Al-Addous, M., "Utilization of hydrogen as clean energy resource in chlor-alkali process",
Energy Exploration & Exploitation, Vol. 39, No. 3, (2019), 1053-1072. (
https://doi.org/10.1177/0144598719839767).
19. Ahmadi, N., Rezazadeh, S., Dadvand, A. and Mirzaee, I., "Study of the effect of gas channels geometry on the performance of polymer electrolyte membrane fuel cell",
Periodica Polytechnica Chemical Engineering, Vol. 62, (2018), 97-105. (
https://doi.org/10.3311/PPch.9369).
20. Ahmadi, N., Rezazadeh, S., Dadvand, A. anf Mirzaee, I., "Numerical investigation of the effect of gas diffusion layer with semicircular prominences on polymer exchange membrane fuel cell performance and species distribution",
Journal of Renewable Energy and Environment (JREE), Vol. 2, (2015), 36-46. (
https://doi.org/10.30501/JREE.2015.70069).
21. Ahmadi, N. and Kõrgesaar, M., "Analytical approach to investigate the effect of gas channel draft angle on the performance of PEMFC and species distribution",
International Journal of Heat and Mass Transfer, Vol. 15, (2020), 119529. (
https://doi.org/10.1016/j.ijheatmasstransfer.2020.119529).
22. Ditaranto, M., Anantharaman, R. and Weydahl, T., "Performance and NOx emissions of refinery fired heaters retrofitted to hydrogen combustion",
Energy Procedia, Vol. 37, (2013), 7214-7220. (
https://doi.org/10.1016/j.egypro.2013.06.659).
25. Intergovernmental Panel on Climate Change (IPCC), Greenhouse gas inventory reference manual: 2006 IPCC guidelines for national greenhouse gas inventories, United Nations. (Available from:
http://www.ipcc-nggip.iges.or.jp/public/2006gl/).