Advanced Energy Technologies
Mina Bahraminasab; Hamed Moqtaderi; Atiyeh Kiaeinejad
Abstract
Microbial Fuel Cells (MFCs) represent an environmentally-friendly approach to generating electricity, but the need to study variation parameters to find improvement conditions has been an important challenge for decades. In this study, a single-chamber MFC was designed to investigate the key parameters ...
Read More
Microbial Fuel Cells (MFCs) represent an environmentally-friendly approach to generating electricity, but the need to study variation parameters to find improvement conditions has been an important challenge for decades. In this study, a single-chamber MFC was designed to investigate the key parameters such as the concentration and type of bacteria, chamber temperature, electrode spacing, and substrate rotation speed that affected the performance of MFCs. Therefore, two types of bacteria, Shewanella oneidensis (S.one) and Escherichia coli (E. coli), were compared as microorganisms. Then, the function of MFC was investigated under the following condition: three temperatures (30 ℃, 45℃, and 60℃), three bacterial concentrations (0.5% (v/v) (4.5 mg/ml), 1% (v/v) (9mg/ml), and 1.5% (v/v) (13.5mg/ml)), electrode distances (2 cm, 3 cm, 4cm), and substrate speeds (100 rpm, 150 rpm, 200 rpm). Ultimately, (S.one) bacteria, a chamber temperature of 45 ℃, a bacterial concentration of 1% (v/v) (9mg/ml), a cathode-anode spacing of 3 cm, and a rotation speed of 150 rpm proved to be the most efficient parameter settings for the constructed microbial fuel cell. The maximum voltage and highest power density were 486.9 mV and 9.73 mW/ , respectively, with a resistance of 7500 ohms. These results are meaningful for determining and improving important parameters in an MFC device.
Nima Ahmadi; Sajad Rezazadeh; Abdolrahman Dadvand; Iraj Mirzaee
Abstract
A three-dimensional computational fluid dynamics model of a proton exchange membrane fuel cell (PEMFC) with both gas distribution flow channels and Membrane Electrode Assembly (MEA) is developed. A set of conservation equation is numerically solved by developing a CFD code based on the finite volume ...
Read More
A three-dimensional computational fluid dynamics model of a proton exchange membrane fuel cell (PEMFC) with both gas distribution flow channels and Membrane Electrode Assembly (MEA) is developed. A set of conservation equation is numerically solved by developing a CFD code based on the finite volume technique and SIMPLE algorithm. In this research, some parameters like oxygen consumption, water production, velocity distribution, liquid water activity and the fuel cell performance for conventional cases (base Cases) are presented and compared to those in cases with semicircular prominences. The numerical simulations indicated that prominent gas diffusion layer (GDL) could improve the transport of the species through the porous layers and this leads to increment in fuel cell performance. Hence, prominent gas diffusion layers would result in higher current density. Finally the numerical results for the base Cases were compared with the experimental data, which represented reasonable agreement.
