Synthesis and Optimization Process of Ethylene Glycol-Based Biolubricant from Palm Kernel Oil (PKO)

Document Type: Research Article

Authors

Department of Agricultural & Bioresources Engineering, Federal University of Technology Minna, Nigeria

Abstract

Internationally exploited lubricants are derived from coal and petroleum. Due to their high consumption and effects of their long-term pollution on the environment, it is imperative to use renewable and cheap feedstock for the synthesis of bio-based lubricants. This study presents the synthesis and optimization process of Ethylene Glycol (EG) based bio-lubricant from palm kernel oil. Palm Kernel Methyl Ester (PKME) was synthesized at a reaction time of 60 min, a molar ratio of oil: methanol 1:6, a temperature of 60 oC, and catalyst of 1 % wt/wt (in-situ transesterification) via reactive extraction. Box–Behnken design (BBD) in response surface methodology (RSM) was applied to this experimental layout. The effects of molar ratio, reaction time, and temperature on the synthesis of palm kernel biolubricant (PKBL) were evaluated. The PKBL structure was characterized by Fourier Transform Infra-Red (FT-IR) and Gas Chromatography-Mass Spectrophotometer (GC-MS) analysis, showing favorable lubricating properties. The PKME yielded 94.53 wt% based on the weight of the oil, while transesterification of the in situ derived PKME with EG yielded 93.08 wt% of the EG ester (Biolubricant). The maximum biolubricant recovery was 81.48 wt% obtained at a molar ratio of 3:1, time of 2.48 h, and temperature of 135 oC. The temperature and mole ratio were established to be the most significant terms. PKBL characteristics conformed to ISO VG criteria and had high potential for biolubricant feedstock.

Keywords

Main Subjects


1.     Ozioko, F.U., "Extraction and characterization of soybean oil based bio-lubricant", AU Journal of Technology, Vol. 15, (2012), 260-264.

2.     Mirghani, M.É.S., Kabbashi, N.A., Qudsieh, I.Y. and Ibrahim, I., "Fabrication of Naharseed oil for bio-lubricant production", Proceedings of Malaysian International Conference on Trends in Bioprocess Engineering, Universiti Malaysia Perlis, Malaysia, (3–5 July 2012), 45-58.

3.     Borugadda, V.B. and Goud ,V.V., "Response surface methodology for optimization of bio-lubricant basestock synthesis from high free fatty acids castor oil", Energy Science and Engineering, Vol. 3, (2015), 371-383. (https://doi.org/ 10.1002/ese3.77).

4.     Schneider, M.P., "Plant-oil-based lubricants and hydraulic fluids", Journal of the Science of Food and Agriculture, Vol. 86, (2006), 1769-1780. (https://doi.org/10.1002/jsfa.2559).

5.     Rani, S., Joy, M.L. and Nair, K.P., "", Industrial Crops and Products, Vol. 65, (2015), 328-338. (https://doi.org/ 10.1016/j.indcrop.2014.12.020).

6.     Aji, M.M., Kyari, S.A. and Zoaka, G., "Comparative studies between bio-lubricants from jatropha oil, neem oil and mineral lubricant (Engen Super 20w/50)", The Journal of Applied Research, Vol. 4, (2005), 252-257. (https://doi.org/10.1007/978-981-10-4870-8).

7.     Salimon, J., Salih, N. and Yousif, E., "", European Journal of Lipid Science and Technology, Vol. 56, (2010), 112-519.

8.     Aliyu, M., Musa, U., Mohammed, I.S., Adam, A., Abdullahi, L., Abubakar, M. and Ndagi, B., "Synthesis and characterisation of bio-lubricant from palm kernel oil (response surface methodology)", Proceedings of The 2017 Annual Conference of the School of Engineering & Engineering Technology (SEET), The Federal University of Technology, Akure, Nigeria, (11-13 July 2017), 333-342.

9.     Musa, U., Mohammed, I.A., Sadiq, M.M., Aberuagba, F., Olurinde, A.O. and Obamina, R., "Synthesis and characterization of trimethylolpropane-based bio-lubricants from castor oil", Proceedings of the 45th Annual Conference of NSChE, Warri, Nigeria, (5-7 November 2015).

10.   Bilal, S.I., Mohammed-Dabo, I.A., Nuhu, M., Kasim, S.A., Almustapha, I.H. and Yamusa, Y.A., "Production of bio-lubricant from Jatropha curcas seed oil", Journal of Chemical Engineering and Materials Science, Vol. 4, (2013), 72-79. (DOI: 10.5897/JCEMS2013.0164).

11.   Menkiti, M., Anaehobi, H., Oyoh, K. and Nnaji, P., "Process optimization and kinetics of bio-lubricants synthesis from fluted pumpkin seed", Journal of Chemical Engineering, Vol. 11, (2015), 1857-7881. (ISSN: 1857-7881 (Print), e-ISSN: 1857-7431).

12.   Myers, R.H., Montgomery, D.C. and Anderson-Cook, C., Response surface methodology: Product and process optimization using designed experiments, John Wiley & Sons, New York, (2009). (https://doi.org/10.1002/qre.1020).

13.   Avramovic´, J.M., Velicˇkovic´, A.V., Stamenkovic´, O.S., Rajkovic´, K.M., Milic´, P.S. and Veljkovic´, V.B., "Optimization of sunflower oil ethanolysis catalyzed by calcium oxide: RSM versus ANN-GA", Energy Conversion and Management, Vol. 105, (2015),1149-56. (https://doi.org/ 10.1016/j.enconman.2015.08.072).

14.   Betiku, E., Akintunde, A.M. and Ojumu, T.V., "Banana peels as a biobase catalyst for fattyacid methyl esters production using Napoleon’s plume (Bauhinia monandra) seed oil: A process parameters optimization study", Energy, Vol. 103, (2016), 797-806. (https://doi.org/10.1016/j.energy.2016.02.138).

15.   Sarve, A., Sonawane, S.S. and Varma, M.N., "Ultrasound assisted biodiesel production from sesame (Sesamum indicum L.) oil using barium hydroxide as a heterogeneous catalyst: Comparative assessment of prediction abilities between response surface methodology (RSM) and artificial neural network (ANN)", Ultrasound Sonochemisry, Vol. 26, (2015), 218-228. (https://doi.org/10.1016/j.ultsonch.2015.01.013).

16.   Ang, G.T., Tan, K.T., Lee, K.T. and Mohamed, A.R., "Optimization and kinetic studies of sea mango (Cerbera odollam) oil for biodiesel production via supercritical reaction", Energy Conversion and Management, Vol. 99, (2015), 242-251. (https://doi.org/10.1016/j.enconman.2015.04.037).

17.   Ocheje, O., Matthew, M., Manase, A. and Ifechukwu, E., "Optimization of the operating parameters for the extractive synthesis of bio-lubricant from sesame seed oil via response surface methodology", Egyptian Journal of Petroleum, (2017). (http://dx.doi.org/10.1016/j.ejpe.2017.04.001).

18.   Alhassan, Y., Kumar, N., Bugaje, I.M. and Mishra, C., "Optimization of gossypium arboreum seed oil biodiesel production by central composite rotatable model of response surface methodology and evaluation of its fuel properties", Journal of Petroleum, Vol. 67, (2013), 56-67. (DOI: 10.5897/JPTAF2013.009).

19.   Zhang, Q., Wu, J., Ma, P., Cai, J. and Zhang, Y., "Acid value determination and pre-esterification of crude Euphorbia lathyris L. Oil", World Journal of Engineering and Technology, Vol. 3, (2015), 70-82. (DOI: 10.4236/wjet.2015.32007).

20.   Bravi, E., Benedetti, P., Marconi, O. and Perretti, G., "Determination of free fatty acids in beer wort", Food Chemistry, Vol. 151, (2014), 374-378. (https://doi.org/10.1016/ j.foodchem.2013.11.063).

21.   Hemmati-Sarapardeh, A., Aminshahidy, B., Pajouhandeh, A., Yousefi, S.H. and Hosseini-Kaldozakh, S.A., "A soft computing approach for the determination of crude oil viscosity: Light and intermediate crude oil systems", Journal of the Taiwan Institute of Chemical Engineers, Vol 59, (2016), 1-10. (https://doi.org/ 10.1016/j.jtice.2015.07.017).

22.   Matthew, C.M., Ocheje, O., Kechinyere, B.O. and Okechukwu, D.O., "Synthesis and tribological evaluation of sesame oil-based trimethylolpropane ester", Journal of the Chinese Advanced Materials Society, Vol. 3, (2015), 71-88. (https://doi.org/ 10.1080/22243682.2015.1013154).

23.   Surapoj, K., Suchada, B. and Chawalit, N., "Effects of transesterification conditions on synthesis of trimethylolpropane esters", Proceedings of Pure and Applied International Conference (PACCON), Chon Buri, Thailand, (23-25 January 2013).

24.   Betiku, E., Victoria, O.O., Niyi, B., Ayorinde, I. and Ayiboye, B., "Predictive capability evaluation of RSM, ANFIS and ANN: A case of reduction of high free fatty acid palm kernel oil via esterification process", Energy Conversion and Management, Vol. 124, (2016), 219-230. (https://doi.org/10.1016/j.enconman. 2016.07.030).

25.   Reshad, A.S., Pankaj, T. and Vaibhav, V.G., "Extraction of oil from rubber seeds for biodiesel application: Optimization of parameters", Fuel, (2015). (http://dx.doi.org/10.1016/j.fuel. 2015.02.058). (http://dx.doi.org/10.1016/j.fuel.2015.02.058).

26.   Silitonga, A.S., Mahlia, T.M.I., Masjukia, H.H. and Ong, H.C., "Ceiba Pentandra: A feasible non-edible oil source for biodiesel production", Proceedings of International Green Energy Conference and the DNL Conference on Clean Energy (IGEC-DCCE), Vol. 110, (2012), 1-9.

27.   Mazumdar, P., Borugadda, V.B., Goud, V.V. and Sahoo, L., "Physico-chemical characteristics of jatropha curcas L., of North East India for exploration of biodiesel", Biomass Bioenergy, Vol. 46, (2012), 54-64. (https://doi.org/10.1016/j.biombioe. 2012.07.005).

28.   Atabani, A.E., Badruddin, H.H., Chong, W.T. and Lee, K.T., "Pangium edule reinw: A promising non-edible oil feedstock for biodiesel production", Arabian Journal for Science and Engineering, Vol. 40, (2015),583-4. (DOI: 10.1007/s13369-014-1452- 5).

29.   Giakoumis, E.G., "Analysis of 22 vegetable oils’ physico-chemical properties and fatty acid composition on a statistical basis, and correlation with the degree of unsaturation", Renewable Energy, (2018). (http://doi.org /10.1016/j.renene. 2018.03.057). (https://doi.org/10.1016/j.renene.2018.03.057).

30.   Asuquo, J.E., Anusiem, A.C.I. and Etim, E.E., "Extraction and characterization of rubber seed oil", International Journal of Modern Chemistry, Vol. 1, (2012), 109-5.

31.   Yuan, X., Liu, J., Zeng, G., Shi, J., Tong, J. and Huang, G., "Optimization of conversion of waste rapeseed oil with high FFA to biodiesel using response surface methodology", Renewable Energy, Vol. 33, (2008), 1678–1684. (https://doi.org/ 10.1016/j.renene.2007.09.007).

32.   Farrukh, J., Ala’a, H.A., Lamya, A., Mohab, A.A., Paul, H. and Umer, R., "Optimization of oil extraction from waste ‘‘Date pits” for biodiesel Production", Energy Conversion and Management, Vol. 117, (2016), 264-272. (dx.doi.org/10.1016/ j.enconman.2016.03.025).

33.   Russell, V.L., "Response surface methods in R, using RSM", Journal of Statistical Software, (2009).

34.   Sripada, P.K., Comparative tribological property evaluation of trimethylolpropane based bio-lubricants derived from methyl oleate and canola biodiesel, (2012), 56–57.

35.   Arbain, N.H. and Salimon, J., "Synthesis and characterization of ester trimethylolpropane based Jatropha curcas oil as bio-lubricant base stocks", Journal of Science and Technology, (2011), 47-58. (ISSN: 2229-8460, e-ISSN: 2600-7924).

36.   Ghazi, T.I.M., Gunam, R.M.F. and Idris, A., "Production of an improved bio based lubricant from Jatropha curcas as renewable source", Proceedings of The Third International Symposium on Energy from Biomass and Waste, Venice, Italy, (8-11 November 2010), 1-10.

37.   Mohammed, F.M.G.R., Ghazi, I.M.T. and Azni, I., "Temperature dependence on the synthesis of jatropha bio-lubricant", Proceedings of IOP Conference Series: Materials Science and Engineering, (2011), Vol. 17, 012032. (http://doi.org/10.1088/ 1757-899X/17/1/012032).